There are two ways to integrate to Vatech EzSensor:
1. SDK
2. TWAIN
Using the SDK is recommended, but TWAIN is always installed by default in the driver package.
SDK integration
1. Download
EzSensor Twain Installer
2. Extract the files from the mapp
3. Run setup.exe
3. Click through the wizard/installer without making any changes. I.e. click "Next" and "Install".
4. Complete the installation.
5. Install the sensor's corresponding calibration files under "C:\EzSensor\MultiSensor\".
If you do not have access to your calibration files, contact your Vatech dealer. The serial number of the sensor is printed on the USB connection of the device.
6. Open the Muntra offline-app, login and go to "Den här datorn" under the settings icon in the top right corner.
7. Add
"Intraoral USB Sensor" by selecting "Add to menu" and "Reactivate after scanning" "Add source: Vatech Ezsensor"
8. Reload the Muntra offline app
TWAIN integration (deprecated)
1. Download
EzSensor Twain Installer
2. Run setup.exe
3. Click through the wizard/installer without making any changes. I.e. click "Next" and "Install".
4. Complete the installation.
5. Install the sensor's corresponding calibration files under "C:\EzSensor\MultiSensor\".
If you do not have access to your calibration files, contact your Vatech dealer. The serial number of the sensor is printed on the USB connection of the device.
6. Open the Muntra offline-app, login and go to "Den här datorn" under the settings icon in the top right corner.
7. Add
"Rayence Intraoral USB Sensor" by selecting "Add to menu" and "Reactivate after scanning".
8. Reload the Muntra offline app
9. To exit acquisition, press "ESC" on the keyboard or double-click the sensor window.
