Below are the recommended default settings for PLANMECA Didapi DidapiKit 5.15.1. Open the
PLANMECA Didapi Configuration program and go to the
Image processing tab under
ProSensor settings.
---
## Image enhancements
Select
Contrast and sharpness enhancement (not DICE 2).
Under this option, enable
Auto Levels Enabled and enter the following values:
| Setting | Value |
|---|
| Black (%) | 0.1 |
| White (%) | 0.0 |
| Midtones (gamma) | 0.5 |
Leave the following
unchecked (disabled):
-
DICE (Dental Image Contrast Enhancement)
-
Logarithmic mapping
---
## Sharpen and median filter
Leave both filters unchecked (disabled):
-
Median filter — unchecked
-
Sharpen filter — unchecked
---
## Advanced settings
Auto exposure threshold values
| Sensor size | Threshold |
|---|
| Sensor size 0 (S0) | 50 |
| Sensor size 1 (S1) | 50 |
| Sensor size 2 (S2) | 50 |
Denoise filtering
Enable
Denoise filtering (checked).
---
## Resetting to defaults
If settings have been changed, you can reset each section to its defaults using the
Reset to defaults button in that section.
Note: In the
Image enhancements (Brightness and contrast) section,
Reset to defaults will revert the setting to
DICE 2 — not the recommended settings above. After resetting, you must manually select
Contrast and sharpness enhancement and enable
Auto Levels Enabled with the values from the table above.
Click
OK or
Apply to save your changes.
